|Matrial:||উচ্চ গতির ইস্পাত||আদর্শ:||জিবি, এএসটিএম, ডিআইএন, জেআইএস|
|গ্রেড:||এম 42 / 1.3247||ব্যাস:||2-300mm|
|দৈর্ঘ্য:||নিচে 16 মিটার||আকার:||বৃত্তাকার বার|
|কৌশল:||ঠান্ডা আঁকা; হট ঘূর্ণিত; ঠান্ডা ঘূর্ণিত; নকল||ভূতল:||কালো, উজ্জ্বল, পালিশ, peeled, বা অনুরোধের ভিত্তিতে|
|অতিস্বনক পরীক্ষা:||100% ইউটি পাস||প্রসেসিং:||Annealed বা quenched এবং বদমেজাজি দেওয়া|
|শেষ:||Beveled, প্রয়োজন হিসাবে প্লেইন শেষ||মান পরিদর্শন:||এসজিএস, BV ইত্যাদি|
|সেবা:||কাটন সেবা এবং তৃতীয় পক্ষ পরিদর্শন প্রদান করা হয়|
high speed tool steel,
hss tool steel bar
AISI high speed steel material M42 tool steel is a molybdenum-series high-speed steel alloy with an additional 8% cobalt. (HSS Steel M42) 8% Cobalt tool bits are designed for machining work hardening alloys and other tough materials. They have increased water resistance and tool life. This improves performance and retention of the cutting edge. M42 steel composition makes for a good combination of toughness and hardness.
High-speed steel M42 steel is widely used in metal manufacturing industries and in cutting tools manufacturing because of its superior red-hardness as compared to more conventional high-speed steels, allowing for shorter cycle times in production environments due to higher cutting speeds or from the increase in time between tool changes. HSS M42 tool steel is also less prone to chipping when used for interrupted cuts and costs less when compared to the same tool made of carbide. Tools made from cobalt-bearing high speed steels can often be identified by the letters HSS-Co.
AISI M42 tool steel is a conventionally manufactured cobalt alloyed high-speed steel. The various stages of the manufacturing process are chosen and controlled so that an end product is obtained with a good structure in terms of carbide size and distribution. This is a distinct advantage for the finished tool.
AISI M42 tool steel is a high-speed steel suitable for cutting tools such as, twist drills, broaches, taps, milling, cutters, saws, reamers etc. In terms of performance, HSS grade M42 is a steel to be used in conditions where the demand for hot hardness is of great importance i.e. where high performance is essential.
Typically employed to machine the super alloys and exotic, AISI HSS M42 tool steel is employed in drills, hobs, taps, end mills, milling cutters, form and gear cutters, broaches and chasers.
|Steel Grade||1.3247 / M42||Application||Tool steel, Mold Steel|
|Shape||Round Bar||Standard||GB, ASTM, DIN,JIS|
|Dimension||Φ2-300 mm; length below 16m||Surface||Black, Bright, Polished, Peeled|
|Technique||Cold drawn; Hot rolled; Forged||Ultrasonic Test||100% UT Passed|
-EAF+(ESR) or EAF+LF+VD+(ESR)
-HOT rolled or Forged, Annealed
-Surface Finish: Black, Rough Machined, Peeled, Turned or as per given requirements
-UT 100% passed
-Cutting service provided
-Third Party inspection is acceptable (SGS, BV etc.)
CHEMICAL COMPOSITION (%)
|Hardness, Rockwell C (oil quenched from 1204°C, 5 minutes)||64.3||64.3|
|Hardness, Rockwell C (oil quenched from 1177°C, 5 minutes)||65.5||65.5|
|Hardness, Rockwell C(oil quenched from 1163°C)||65.8||65.8|
|Izod impact unnotched (oil quenched at 1191°C; 510°C temper temperature)||13.6 J||10.0 ft- lb|
|Izod impact unnotched (oil quenched at 1191°C; 622°C temper temperature)||24.4 J||24.4 J|
|Machinability (1% carbon steel)||35.0 – 40.0%||35.0 – 40.0%|
|Elastic modulus||190-210 GPa||27557-30457 ksi|
Forging of ASTM A600 High Speed Tool Steel M42
Pre heat the M42 high speed steel slowly and uniformly to 650-760°C and equalise. Then increase more quickly to the forging temperature of 1010-1150°C and equalise prior to forging. Do not allow the forging temperature to drop below 980°C, if this occurs re heating will be necessary. Always cool the m42 high speed steel very slowly after forging.
Heat Treatment of AISI M42 High Speed Material
AISI M42 high speed steel is heated at 871°C (1599°F) and then cooled slowly in a furnace.
To relieve stresses created by extensive machining or tooling with complex geometries. Heat in a neutral atmosphere for 1 to 2 hours after reaching a temperature of 1110 to 1200°F (600 to 650°C), followed by slow cooling in the furnace.
AISI M42 high speed steel is preheated to 871°C (1599°F), soaked and finally heated to 1204°C (2199°F).
Tempering M42 tool steel at 560°C / 1040°F or higher 3 times for at least 1 hour at full temperature is recommended.
Machinability of AISI M42 Tool Steel
AISI Steel grade M42 tool steel can be drilled, turned, threaded, broached, milled and tapped when it is in its annealed condition and rated at 45% of 1% carbon steel.
What we can offer?
-We offer a wide range of steel products in a wide variety of dimensions and executions, according to the common international specifications or customize.
-Machining and heat treatment are available.
-Also, we advise you in choosing the right materials.
OUR MAIN PRODUCTS ARE LISTED AS BELOW
-Round: Dia. 2-300 mm
-Flat: T. 6-250 mm x W. 20-600 mm
-Block: T. 80-1200 mm x W. 100-1600 mm
PAYMENT AND SHIPPING
1. Both T/T and L/C will be acceptable
2. Trade Terms: FOB, CIF, CFR
3. The delivery will be in 10-15 days if have stock; For customized items, the delivery will be negotiated by both parties
4. Shipping by sea freight from Shanghai Port (PRC) for Bulk orders, by airfreight or express for samples
Shanghai Unite Steel Trading Co., Ltd
We are committed to integrate engineering steel resources in china and serve the global engineering steel market. Our company has more than 15 years of experience in steel researching, production, managing and sales. And our team mostly are based on and worked in national famous steel enterprise.
In the aspect of resources and information, we have established cooperative and stronger relationship with nearly hundred enterprises, either state-owned or private owned in china.
What’s more, we have built long, deep and close business relationship with dozens of steel company, Sharing and holding equities with several steel enterprises. Because of the close cooperation with steel companies and our pioneering spirit, which can ensure us stay at the top competition, and ensure our customers get what they really want!
Q: Are you a manufacturer or merely a trader?
A: We are group of companies and owned manufacturer bases and trading company. We specialized in special steel which include alloy structural steel and carbon steel and stainless steel, etc. All material are with high quality and competitive price.
Q: How do you guarantee the quality of your product?
A: Firstly, we can provide the certificates from the third party, such as TUV, CE, if you need. Secondly, we have a complete set of inspection system and every process is checked by QC. Quality is the lifeline of enterprise survival.
Q: Delivery time?
A: We have ready stock for most of material grades in our warehouse. If the material doesn't have stock, the delivery lead time is about 5-30 days after receiving your prepayment or firm order.
Q: What is the payment term?
A: T/T or L/C.
Q: Can we visit your company and factory?
A: Yes, warmly welcome! We can book the hotel for you before you come to China and arrange our driver to our airport to pick you up when you come.
We are happy to answer your questions and make you an offer for these and other materials. Contact us now for more information.
Your Contact Person
Ms Chilli Ho
ব্যক্তি যোগাযোগ: Neya